crazy mig mig33 learn and share

Another flooder I found on the net.

This one works same as ispam; enter text to flood, hit start button, and place mouse cursor over text area of room or pvt chat.
This spammer can flood siingle message or 2 messages.
Ive tested it and found double message flooding to be pretty slow BUT single message flooding is really fast Razz
If you have trouble getting spammer to stop flooding simply press ctrl alt del and it will stop.
For more info press the help button on the spammer.
Download here

Instructions:

• Go to chat room
• Fill flood message
• Enter flood speed (1 and higher. 1 is fastest. Speed reduces as you go higher)
• Hit start button
• Click on text area of chat room
• If it gets stuck press ctrl alt del

DX ADVANCE KICKER 4.00 C0MING S00N Razz

Whats new :
1: 4 SETS OF 15 IDS
2: 21 STYLISH FLO0DING AND EM0TE FLOODING
3: ADMIN DETECTOR
4: AUTO LEAVE
5: AUTO KICKING
6: AUTO SEND TEXT
7: AUTO ROLL KICK STARTER
8: AUTO R00M LIST RETRIVER (FASTER THEN OTHER SOFTWARES)
9: MANUAL KICKING
10: ANTI R00M FLOOD ERROR
11: IP FINDER AND CHANGER
12: ADVANCE MODE (SPECIAL FEATURE)

WELL GUYZ , M NOT UPLOADING THE FULL VERSION , DUE TO SOME REASONS !!!!!

JUST WANA SHARE THE TRIAL VER HERE ,
OK HERE IS THE >OK HERE IS THE DOWNLOAD LINK

I AM NOT PROVIDING YOU THE TUTORIAL ON HOW TO USE IT , COZ I KNOW U GUYZ WILL LERAN IT BY URSELF

Download Here

PR0CEDURE FOR AUTO-LIST SETUP-

1-EXTRACT ALL FILES SUMWHERE.INSTALL THE OEPROBETA-2 APPLICATION.
2-THEN GOTO C:\Program Files\oePROv02
3-PASTE THE FOUR .EXE FILES, "oePRO1_01", "oePRO1_02" , "oePRO2_01" , "oePRO2_02" IN

OEPROV02 FOLDER..IT WILL ASK U TO REPLACE MIGPRO,S?DEN JUS CHECK "YES TO ALL".
4-PUT "MIGPRO.ini" FILE IN C:\Program Files\oePROv02
5-FILL UR ID01,ID02,ID03,ID04 THERE IN MIGPRO.ini FILE , UR PASSWORD FOR THOSE IDS ND THE

ROOM NAME WHERE U WANT TO DO KIKING ND NEEDED TO C ITS AUTO-TARGET LIST.(iF U WANT TO CHANGE

ROOM, JUS CHANGE IT IN MIGPRO.ini FILE IN C:\Program Files\oePROv02 ND WRITE DA SAME IN

SOFTWARE(APPLICATION)WHENEVA U WANT TO ENTER)
6-NOW OPEN OEPROV02 APPLICATION(SOFTWARE)
7-IN SET1 ,IN 1ST ND SECOND ID..TYPE ANYTHING LIKE AC, BE, HHHA,IIA ANYTHING JUS TO OPEN ITS

MIGPRO THROUGH SOFT. OR IF U WANT TO USE SET2 AWSO, DEN DO DA SAME IN ITS 1ST TWO IDS..(U

CAN USE M
8-IN REST 10IDS FILL UR MULTI IDS NAME,DEN DER PASSWORD IN "Password" BOX, ND SAME CHATROOM

NAME AS U PUT IN UR MIGPRO.ini FILE.
9-NOW SAVE UR SET1 ND OPEN IT ND PRESS ENTER TO SAME ROOM...U WILL C, AUTO-LIST RETRIEVED.
10-ND NOW DATS IT..DO SAME FOR SET2(IF U WANT TO USE IT ASWELL)

Download Here

Okay this is your MigPro auto Flooder:
I made this software for my own home
use, but I publish this software because
I love you...

Warning:
I am not supporting you in flooding!!
You downloaded and are using this
software on your own risk!!

How to use:
Open the "setup01.ini"

Arrow Edit it in this way:
[details]
uname=your-username
password=your-usernames's-password
chatroom=your-selected-chatroom

Download here

Migpro expert represent one of development from old migpro, migpro expert design to be able to run 20 application migpro with the very gratifying performance, all kicker mig33 can use this tools for the flood of or for the kick of, only with one click then 20 migpro of that good controller enter, leave and kick. besides all kicker can send text or flood code

download migpro expert click here

VOICE OVER INTERNET PROTOCOL ON YOUR PC WITH MIG33

With mig33, you can make inexpensive international calls, with rates varying from country to country. You can make even cheaper calls if you use our VoIP Toolbar and make calls directly from your PC. And if you call a mig33 user on their PC, it's free.

Download here

VOIP Mig33,mig33 toolbar, mig33 tool, mig33 on pc, mig33 calling,VOIP Mig33,mig33 toolbar, mig33 tool, mig33 on pc, mig33 calling,VOIP Mig33,mig33 toolbar, mig33 tool, mig33 on pc, mig33 calling,VOIP Mig33,mig33 toolbar, mig33 tool, mig33 on pc, mig33 calling,Voice over Internet Protocol (VoIP) is a protocol optimized for the transmission of voice through the Internet or other packet switched networks. VoIP is often used abstractly to refer to the actual transmission of voice (rather than the protocol implementing it). VoIP is also known as IP Telephony, Internet telephony, Broadband telephony, Broadband Phone and Voice over Broadband. "VoIP" is pronounced voyp. Companies providing VoIP service are commonly referred to as providers, and protocols which are used to carry voice signals over the IP network are commonly referred to as Voice over IP or VoIP protocols. They may be viewed as commercial realizations of the experimental Network Voice Protocol (1973) invented for the ARPANET providers. Some cost savings are due to utilizing a single network to carry voice and data, especially where users have existing underutilized network capacity that can carry VoIP at no additional cost. VoIP to VoIP phone calls are sometimes free, while VoIP to public switched telephone networks, PSTN, may have a cost that is borne by the VoIP user.Voice over IP protocols carry telephony signals as digital audio, typically reduced in data rate using speech data compression techniques, encapsulated in a data packet stream over IP.There are two types of PSTN to VoIP services: Direct Inward Dialing (DID) and access numbers. DID will connect the caller directly to the VoIP user while access numbers require the caller to input the extension number of the VoIP user.Voice over Internet Protocol has been a subject of interest almost since the first computer network. By 1973, voice was being transmitted over the early Internet.[1] The technology for transmitting voice conversations over the internet has been available to end-users since at least the early 1980's. In 1996, a shrink-wrapped software product called Vocaltec Internet Phone Release 4 provided VoIP, along with extra features such as voice mail and caller id. However, it did not offer a gateway to the analog POTS, so it was only possible to speak to other Vocaltec Internet Phone users.[2] In 1997, Level 3 began development of its first softswitch (a term they invented in 1998); softswitches were designed to replace a traditional hardware switchboards by serving as the gateway between two telephone networksBecause UDP does not provide a mechanism to ensure that data packets are delivered in sequential order, or provide Quality of Service (known as QoS) guarantees, VoIP implementations face problems dealing with latency and jitter. This is especially true when satellite circuits are involved, due to long round trip propagation delay (400 milliseconds to 600 milliseconds for geostationary satellite). The receiving node must restructure IP packets that may be out of order, delayed or missing, while ensuring that the audio stream maintains a proper time consistency. This functionality is usually accomplished by means of a jitter buffer in the voice engine.Another challenge is routing VoIP traffic through firewalls and address translators. Private Session Border Controllers are used along with firewalls to enable VoIP calls to and from a protected enterprise network. Skype uses a proprietary protocol to route calls through other Skype peers on the network, allowing it to traverse symmetric NATs and firewalls. Other methods to traverse firewalls involve using protocols such as STUN or ICE.